“With this double scissor lift table you can easily lift very long goods weighing up to 4000kg!”
Due to the horizontal arrangement of two scissors next to each other under the lifting table platform, a very large platform length is achieved. Since not one large pair of scissors is installed, but two smaller ones, a lower and space-saving height is also achieved. However, the disadvantage is that the stroke is lower than with a very long single scissor lift table, as the scissor length is shorter.
There are almost no limits to the platform length. In the standard range, these tandem scissor lift tables reach up to 6000 mm – incredible 6m platform length! In the special construction – which maluk can offer through years of experience – platform lengths of over 10 meters are not uncommon. With such extremely long lifting tables, it is always necessary to check whether you may need more than just two scissors next to each other.
Long lifting tables are very often used in the wood industry . Whether boards or wooden panels, tandem scissor lift tables cover all required lengths. When used in front of, for example, a woodworking machine, it is important that it is known how many complete strokes but also how many short strokes the lifting table makes. Depending on the application, the design or motor must be designed more strongly to extend the service life. Special protective devices must also be installed in very dusty environments. Here, for example.B high-performance filters or a bellows are used.
It should also be noted that the maximum payload must always be distributed over the entire platform. There are special solutions for one-sided loads. Here it always depends on the application, whether it is sufficient to increase the actual load capacity of the tandem scissor lift table or whether you have to install a flow divider. The maluk technicians are happy to help you with some advice.
Often these long tandem scissor lift tables are also equipped with a roller conveyor or a chain conveyor. These can be provided by the customer or delivered by us.
Due to the restriction in height, we had to use a special tandem scissor lift table. Through the two “small” scissors, we have achieved the customer’s specification.
Our lifting tables can be coated in all colours. We have also adapted the electronics to the customer’s specifications.
If it can be a little bigger…
Here, the customer wanted an extremely large lifting table platform, which still moves evenly upwards. Thanks to the tandem shears and a volume divider, we were able to more than just satisfy the customer.
If you have any questions, please contact us immediately. We are looking forward to it!
ABOUT US
maluk GmbH was founded in 2005 and is today a strong partner for mechanical engineering, the wood industry, the steel industry as well as the metal and plastics industry. With a comprehensive range of lifting tables, we support our customers in all areas. We supply lifting tables in all sizes and shapes.
OUR ONLINE SHOP
ADDRESS
Rosenhain 24
9125 Kühnsdorf, Austria
QUICK CONTACT
(C) 2023 maluk.at