Car lift table with canopy

In this project, the task became clear very quickly because the customer knew exactly what he wanted. There should be ACars are transported from the courtyard level to the basement. But no one in the yard should recognize that there is one here Lifting system for cars is installed, so a canopy was requested.

The system has an effective load capacity of 3500 kg and a platform of 7000 x 3000 mm. The difference in level is almost 4.5m.
The platform, base frame and canopy are hot-dip galvanized for a longer service life.

The roof of the car lift table is covered with plaster by the customer so that it is not obvious at first glance that a lifting system has been installed here. We have installed lighting under the roof so that you can see better when loading or parking. We also carried out the complete assembly including cabling and lifting. After assembly, we carried out detailed training.

A Car lift table with canopy is the ideal solution if you want to lift your car from yard level to the basement. By installing a lift table in your basement, you can safely and conveniently drive your car into the basement. This means you can protect your car from the elements and damage.

The Installation of a car lift table However, it is not as easy as it might seem at first glance. It is important that the lifting table is assembled professionally so that it functions safely and reliably. You should therefore always have the lifting table installed by our specialist staff. This means you can be sure that the lifting table will be installed correctly and that you will enjoy it for a long time.

Project details from car lift table

Delivery and lifting from the car lift table

If the conditions on site allow it, we always deliver our car lift tables to the construction site fully assembled. This has the advantage that assembly can be completed much more quickly.

We lift the lifting table for cars directly from the semi-trailer into the shaft prepared for it.

Car lift table with canopy half lowered

At Car lift tables with canopy there is a special feature. Operation of the system is only permitted at the upper stop. The operator must always be able to see the entire danger area from the control point.
The operator is responsible for ensuring that no one approaches the system. If a dangerous situation occurs, the lifting process must be stopped.

Car lift table in the lower lifting position

In the lower lifting position, the canopy rests on its counterpart in the shaft. This ensures that you can drive a car onto the roof without any height difference.

The canopy is designed with a tub. The customer adds a surface to this tub (e.g. asphalt or paving). So at first glance you can't tell that there is one here Car lift table with canopy hidden.

Depending on the installation location or application, you also have to think about drainage. We usually leave the canopy overhanging the top. A sheet metal folded on the underside stands in a Rigol installed by the customer. This keeps surface water out of the pit.

Sectional door in the basement

The lower stop from car lift table is secured with a sectional door. The lifting table only moves if this gate is properly closed. The gate also opens car lift table only when the lifting table is in the lower position.

You can also clearly see from the picture that the supports of the canopy are separated from the actual roof. This is usually done if the lifting height is too high. You can also see the integrated LED lighting.

Order lifting tables now

If you have any questions, please contact us immediately Contact on. We are happy!